 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
USB Installation Instructions,
Programming Software and Driver
Windows XP to Win 8.1
ZIP File
Programming Software and Driver
Windows XP to Win 8.1
ZIP File
| USB Bumpbar Software |
| Download Config Software and Instruction HERE |
For 2015 release
CNC Users, Staging Centers.
Requires MicroSoft .NET4.5: Win 7, 8, etc.
XP is not supported for Programming the keypad.
Once configured it will operate as a keyboard on most any OS including XP
Versions 2.0.3.0 and 2.0.4.0 are the same, no feature upgrades.
CNC Users, Staging Centers.
Requires MicroSoft .NET4.5: Win 7, 8, etc.
XP is not supported for Programming the keypad.
Once configured it will operate as a keyboard on most any OS including XP
Versions 2.0.3.0 and 2.0.4.0 are the same, no feature upgrades.
- 20 Button Keypads
- 20 Characters / Button
- USB and PS/2 Auto Select
Our new USB - PS/2 Combo Bumpbar. Both USB and PS/2 in one!
- Two interfaces in One connection.
- Injection Molded Black Nylon, very durable
- Withstands high temperatures
- Flexible where needed to take constant usage
- User Changeable cable via the ACCESS door on the back of the nylon style keypad
- Uses our overlays for key designations
- 7 Modes of operation, Mode 4 is customizable by the user or installer, the others are preconfigured.
- 20 or 30 buttons, each location can hold up to 62 key strokes
- Configurable sound, Scroll Lock, Caps Lock, Num Lock, or none
- HID Compliant, so no drivers to load. Works with Windows (TM), Mac (TM), Linux (TM), embedded os's,
most anything USB - 2 Cable connections included: USB & PS/2, Logic Controls(TM) compatible cable available..
- You can use as many keypads on a system as long as you have available ports
- USB 1.1 to 3.0 compatible
- Programmable, Clone-able on a Windows 7 through 10 OS. Programming software allows custom programs
to configure or duplicate keypad.
For Current release 5 firmware released Q2, 2022
CNC Users, Staging Centers.
Requires latest MicroSoft .NET4.x: Win 7, 8, Win 10 etc. only to configure keypad.
XP is not supported for Programming the keypad.
Once configured it will operate as a keyboard on most any OS including XP, Android v6 and up.
CNC Users, Staging Centers.
Requires latest MicroSoft .NET4.x: Win 7, 8, Win 10 etc. only to configure keypad.
XP is not supported for Programming the keypad.
Once configured it will operate as a keyboard on most any OS including XP, Android v6 and up.
- 20 or 30 key style
- Up to 62 Characters per key
- Fixed USB or PS/2 selectable
- Auto USB, PS/2 or RS-232*
- * for RS-232 equipped PCB
2017 Firmware for older 20 Button
USB Keypads with Ver. 3.x.x firmware or newer
| v2.0.3.0 |
Videos on how to Program the Keypad
Older versions of the configuration program, may be required for your use if you have older keypads.
Feb 2017